Search Our Inventory
Banding Lines
Coil Cars
Coil/Sht Lifter
CTL Lines
Downlayers
Edgers
Miscellaneous
PrecLevellers
Presses
Recoilers
Rollformers
Rolling Mills
Scrap Winders
Shears
Slitter Head
Slitting Lines
Straighteners
Tube Mills
Turnstiles
Uncoilers
Upenders

72" x 8.00" x 45,000# DELTA SLITTING LINE

CONSISTING OF THE FOLLOWING:

-UNCOILER:
DOUBLE CONE TYPE
45,000 LBS. CAPACITY
COIL I.D. RANGE: 16" TO 30"
COIL O.D. MAX: 72"
COIL CENTER TO FLOOR: 57"
DIAMETER OF BACK PLATES: 56"
HYDRAULIC SLIDING BASE ON EACH HEAD WITH 48" TRAVEL EACH
THREADING DRIVE WITH DUAL AIR BRAKES
DOUBLE ROLLER TYPE COIL LIFT
OVERALL SIZE: 276" L x 60" W x 90" HIGH ABOVE FLOOR (17" BELOW FLOOR)

-FREE STANDING OVERARM HOLDDOWN ROLL
HYDRAULIC POWER ROTATION
HYDRAULIC POWER LIFT
ROLL FACE: 4" WIDE X 16" DIAMETER STEEL
OVERALL SIZE: 108" L x 40" W x 96" HIGH

-STAMCO PEELER TABLE
HYDRAULIC CYLINDER FOR UP/DOWN AND ONE FOR IN/OUT
(3) ROLL COIL BREAKER
72" WORKING ROLL FACE X 5" DIAMETER
AIR CYLINDER TYPE ADJUSTMENT ON TOP ROLL 4 ½" TRAVEL
OVERALL SIZE: 122" L x 85" W x 96" HIGH

-SLITTER HEAD:
8" DIAMETER ARBORS
72" ARBOR FACE
PASSLINE HEIGHT: 56"
SCREW TYPE OUTBOARD TRAVEL: 18"
ENTRY DRIVEN PINCH ROLLS 6" DIAMETER WITH AIR ADJUSTMENT
MANUAL PARALLEL ARBOR ADJUSTMENT
30 HP AC THREADING DRIVE MOTOR 3/60/230-460 VOLT 1750 RPM 74/37 AMPS
LINK BELT GEAR REDUCER 20.9 WITH OUTPUT OF 84 RPM
OVERALL SIZE: 256" L x 77" W x 94" HIGH

-RECOILER:
20" DIAMETER DRUM
82" DRUM FACE
MANUAL CLAMP AND EXPANSION
NOTE: GRIPPER BAR IS MISSING
MAX COIL O.D.: 72"
CENTER OF COIL TO FLOOR: 44"
HYDRAULIC PUSHOFF
HYDRAULIC OPERATED OVERARM SEPARATOR
OVERALL SIZE: 230" L x 88" W x 91" HIGH

100 HP DC MOTOR 250 VOLT/ 340 AMPS/ 1750 RPM WITH WESTERN GEAR WORKS GEARBOX,
PINION SPEED 1750 RPM, RATIO 8:6:1 RATED FOR 400 HP
TURNER UNIDRIVE 2 SPEED GEARBOX 50 AND 100 RPM BASES ON 100 RPM INPUT
MULTI V BELT DRIVE
OVERALL SIZE: 112" L x 64" W x 36" HIGH

GE DRIVE CONTROL BOX OVERALL SIZE: 32" L x 32" W x 84" HIGH

CONTINENTAL DC GENERATOR 100 KW/ 1770 RPM/ 400 AMP/ 250 VOLT CONT. DUTY
POWERED BY A 150 HP A/C MOTOR 3/60/230-460 VOLT 1770 RPM 350/175 AMPS

-(2) ARM TURNSTILE:
45,000 LBS. CAPACITY EACH ARM
72" ARM LENGTH
6" SLOT X 17" HIGH ARMS
TOP OF ARM TO FLOOR: 52 ½"
DUAL HYDRAULIC MOTOR DRIVEN PUSHOFF
HYDRAULIC ROTATION
OVERALL SIZE: 195" L x 80" W x 72" HIGH

-UMI SCRAP WINDER SERIAL NUMBER SWB 547 BUILT IN 1976
HYDRAULIC LEVEL WIND
10 HP AC MOTOR DRIVE 3/60/230-460 VOLT 880 RPM 33/16.5 AMPS WITH AIR BRAKE
BUNDLE SIZE APPROX: 22" WIDE X 30" DIAMETER
UNLOAD RAMP
OVERALL SIZE: 90" L x 55" W x 60" HIGH

-TOOLING:
APPROX. 200 KNIVES, SPACERS AND RUBBERS IN 7 BOXES
INCLUDING 64 - 1/4" KNIVES, 48 - 1/2" KNIVES

-20 HP A/C HYDRAULIC POWER UNIT, 3/60/220-440 V, 1175 RPM, 52/26 AMPS

-5 HP A/C HYDRAULIC POWER UNIT, 3/60/220-440 V, 1140 RPM, 15/7.5 AMPS

-DELTA MAIN ELECTRICAL OPERATOR CABINET

-LINE DIRECTION: RIGHT TO LEFT

-REMOVED AND IN STORAGE; ROCKFORD, IL.

Your InfoCart Contains 0 Machines

 

John Decator's Cell Phone:  419-215-3387
John Decator's Email Address:  john.decator@sev.org

Jim Clark's Cell Phone:  419-699-0367
Jim Clark's Email Address:  jim.clark@sev.org