Search Our Inventory
Banding Lines
Coil Cars
Coil/Sht Lifter
CTL Lines
Downlayers
Edgers
Miscellaneous
PrecLevellers
Presses
Recoilers
Rollformers
Rolling Mills
Scrap Winders
Shears
Slitter Head
Slitting Lines
Straighteners
Tube Mills
Turnstiles
Uncoilers
Upenders

84" x 0.500" x 50,000# PAXSON CUT TO LENGTH LINE

YEAR: 1979

MATERIAL: MILD STEEL, STAINLESS, 50K PSI SHEAR, 40K PSI YIELD
THICKNESS: 0.047" TO 0.500"
COIL WEIGHT: 50,000# MAX.
COIL WIDTH: 18" TO 84" + 2" MILL EDGE
COIL I.D.: 20" TO 30"
COIL O.D.: 80" MAX.
LINE SPEED: VARIABLE TO 150 FPM
PASSLINE: APPROX. 60"
CUT LENGTHS: 24" TO 240" (480" IN SLIDE THRU MODE)
LINE DIRECTION: RIGHT TO LEFT
MODE OF OPERATION: DUAL MODE - STOP/START FLATTENER, OR
CONTINUOUS LEVELLER W/FEED ROLLS

CONSISTING OF:

-3 PLACE COIL CONVEYOR
BOW TIE ROLLER CONVEYOR TOP
GEAR MOTOR DRIVE

-FLOOR "L" TYPE COIL CAR
ROLLER CONVEYOR TOP
SELF CONTAINED HYD.
HYD. LIFT AND TRAVEL
APPROX. 20" LIFT

-FREE STANDING OVERARM HOLD DOWN
10" DIA. x 72" FACE STEEL ROLL

-DOUBLE EXPANDING STUB UNCOILER
19" TO 30" COIL ID
STEP TYPE MANDRELS: 19" - 24.5" AND 25.5" - 31" EXPANSION
HYDRAULIC EXPANSION
10" DIA. MAIN SHAFTS, ALLOY STEEL
BOTH BASES WITH HYD. CYLINDER TRAVEL
10 HP AC GEAR MOTOR CHAIN DRIVE WITH AIR CLUTCH - BOTH SIDES
WICHITA ATD 121 WATER COOLED BRAKES, BOTH SIDES

-PEELER TABLE
HYD. CYLINDER UP/DOWN, IN/OUT ADJUSTMENT

-HEAVY GAUGE LEVELLER
SERIAL #11629-5 3 / 79
CAPACITY: 0.125" - 0.500"
HYD. ADJ. ROLLER SIDE GUIDES
ENTRY DRIVEN PINCH ROLLS: 12" DIA. x 90" FACE
7 WORK ROLLS
3 OVER 4 DESIGN
6.75" DIA. x 90" FACE WORK ROLLS
3 FLIGHTS OF BACK UPS
TOP BANK IS POWER ADJUSTABLE
BOTTOM BANK IS FIXED
BACKUPS ON THE CENTER 4' OF ROLLS
200 HP DC MOTOR, 1750 RPM

-CARRY OVER TABLE

-5 HI LIGHT GAUGE LEVELER
SERIAL #11629-36
CAPACITY: 0.187" MILD STEEL (0.171" STAINLESS)
ENTRY DRIVEN PINCH ROLLS, 6" DIA. x 90" FACE
17 ROLL LEVELER
2.870" DIA. x 90" FACE WORK ROLLS
7 FLIGHTS OF BACK UPS, 5 MOTORIZED ADJUSTABLE
ROLL BEND ADJUSTMENT BY HYD. MOTORS
HEIGHT ADJUSTMENT: TOP BANK OF ROLLS ADJ. BY HYD. MOTORS
125 HP DC MOTOR, 1750 RPM
FOOTE JONES RIGHT ANGLE REDUCER, 7.59:1 RATIO
REBUILT 1 YEAR AGO
AUTOMATIC LUBRICATION OF GEARCASE AND UNIVERSAL SPINDLES
SLIDING BASE TO REMOVE LEVELER FROM LINE WHEN RUNNING HEAVY GAUGE MATERIAL
TRAVERSE BY HYD. CYLINDER WITH WEDGES TO LOCK LEVELER IN PLACE

-DUAL QUADRANT "PIT" TABLES,
HYDRAULIC CYLINDER LIFT
NON MARKING ROLLERS
EXIT SIDE GUIDES

-PRECISION ROLL FEED
0.135" MAXIMUM IN LOOP MODE
ENTRY SIDE GUIDES
17 HP DC MOTOR DRIVE

-HIGH SPEED MECHANICAL SHEAR
SERIAL #11629-35
AC MOTOR OPERATED BLADE GAP ADJUSTMENT
ENTRY PINCH ROLLS, HYD MOTOR DRIVE
AC MOTOR DRIVE ON SHEAR
40 HP, 1770 RPM
208 / 230 / 460 VOLTS

-AUTOMATIC SHEET STACKER - 20 FT.
FLIPPER ARM SHEET SUPPORT
MOTORIZED BACK STOP LENGTH ADJUSTMENT
MOTORIZED SIDE ARM WIDTH ADJUSTMENT
WITH BACK STOP UP, MATERIAL WILL RUN OUT TO 480"
(4) JACK SCREWS TO MAINTAIN MATERIAL PASSLINE, HYD. MOTOR DRIVEN
IN-LINE DISCHARGE

-EXIT ROLLER CONVEYOR
POWERED ROLLS

-CENTRAL HYDRAULIC POWER UNIT
50 HP AC MOTOR

-OVERALL LINE LENGTH - APPROX. 196'

-NEW CMC DRIVE PACKAGE AND CONTROLS (NEW IN 1998)

-REMOVED AND IN STORAGE; TOLEDO, OHIO

Your InfoCart Contains 0 Machines

 

John Decator's Cell Phone:  419-215-3387
John Decator's Email Address:  john.decator@sev.org

Jim Clark's Cell Phone:  419-699-0367
Jim Clark's Email Address:  jim.clark@sev.org