Search Our Inventory
Banding Lines
Coil Cars
Coil/Sht Lifter
CTL Lines
Downlayers
Edgers
Miscellaneous
PrecLevellers
Presses
Recoilers
Rollformers
Rolling Mills
Scrap Winders
Shears
Slitter Head
Slitting Lines
Straighteners
Tube Mills
Turnstiles
Uncoilers
Upenders

72" x 8.00" x 50,000# LOOPCO SLITTING LINE

YEAR: 1978

MATERIAL PROCESSED: CR-GALV-HRPO
THICKNESS RANGE: 0.020" TO 0.250"
COIL WEIGHT CAPACITY: 50,000 LBS
COIL ID RANGE: 20" TO 24" ENTRY AND EXIT
COIL OD: 72"
LINE OPERATION: PULL THRU//DRIVE ASSIST//DRIVEN LOOP
HAND OF OPERATION: LEFT TO RIGHT

CONSISTING OF THE FOLLOWING:

-ENTRY COIL CAR:
56,000# CAPACITY
"L" TYPE, FLOOR MOUNT DESIGN
84" O.D. CAPACITY
SELF ENCLOSED HYDRAULIC POWER UNIT
PENDANT CONTROL

-UNCOILER: CINCINNATI
72" MANDREL WIDTH
(4) SEGMENT MANDREL
20" I.D. CAPACITY
72" O.D. CAPACITY
SLIDING BASE
HYDRAULIC EXPANSION
WATER COOLED BRAKE WITH COOLER
FULL WIDTH POWERED HOLDDOWN ROLL
FEED UP MOTOR

-UNCOILER OUTBOARD BEARING SUPPORT ARM

-ENTRY UNIT:
PEELER TABLE, FULLY ARTICULATING
BREAKER ROLL
8" DIA. ENTRY PINCH ROLLS
HYD MOTOR PWRD

-EDGE GUIDES, POWERED ADJUSTMENT:
POWERED PINCH ROLLS
ENTRY CROP SHEAR, ROLLER TYPE DESIGN

-SLITTER HEADS:
TWO HEADS W/8" DIA. ARBORS
ARBOR FACE 75.5"
CRANE LIFT OUT DESIGN
100 HP GE DC MOTOR, 1150/2000 RPM, 550 V, 14.6 AMP
WITH A 30 HP AC MOTOR FEED UP DRIVE
COMPLETE COMPLEMENT OF COWELS STANDARD TOOLING
KNIVES ARE LESS THAN 6 MONTHS OLD

-SCRAP WINDER:
12" WIDE x 44" OD SCRAP BALL CAPACITY
HYDRAULIC MOTOR DRIVE
OPPOSED CONE TYPE DESIGN
HYDRAULIC LEVEL WIND

-10' LOOPING PIT WITH CROSSOVER TABLE
HYDRAULIC LIFT TABLE

-COMBINATION ROLL & DRAG TENSION STAND: ALCOS
ENTRY SEPARATOR TOOLING BAR
DRAG BOARD, ALLIGATOR TYPE DESIGN
ROLL TYPE TENSION STAND - ALCOS
TWIN EATON WATER COOLED BRAKES ON SEPARATE STAND
DRIVE SHAFTS TO THE ROLL UNIT
HYDRAULIC MOTOR FEED UP DRIVE
ROLL STAND IS QUICK CHANGE DESIGN

-EXIT CROP SHEAR: TPM
DOWN ACTING
HYDRAULIC ACTUATED
FEED UP TABLE TO THE RECOILER,
HYDRAULIC CYLINDER ACTUATED

-RECOILER: LOOPCO (REBUILT IN 1997)
78" DRUM FACE x 20" DIA. (PADS FOR 24")
72" O.D. CAPACITY
HYDRAULIC COLLAPSE & GRIP
HYDRAULIC PUSHOFF
150 HP WESTINGHOUSE DC MOTOR, 850-1150 RPM, 470 V
2 SPEED GEAR BOX: 34.34:1 & 17.17:1 RATIO'S

-RECOILER OUTBOARD BEARING SUPPORT ARM

-FREE STANDING OVERARM SEPARATOR
WITH SPARE TOOLING SHAFT

-EXIT COIL CAR:
56,000# CAPACITY
72" WIDE DECK
72" O.D. CAPACITY

-TWO HYDRAULIC POWER UNITS:
ONE 50 HP AND THE SECOND IS 25 HP

-ALLEN BRADLEY ELECTRICS (ORIGINAL)

-OPERATOR STATIONS

-LINE IS IN STORAGE; ROCKFORD, IL.

Your InfoCart Contains 0 Machines

 

John Decator's Cell Phone:  419-215-3387
John Decator's Email Address:  john.decator@sev.org

Jim Clark's Cell Phone:  419-699-0367
Jim Clark's Email Address:  jim.clark@sev.org