Search Our Inventory
Banding Lines
Coil Cars
Coil/Sht Lifter
CTL Lines
Downlayers
Edgers
Miscellaneous
PrecLevellers
Presses
Recoilers
Rollformers
Rolling Mills
Scrap Winders
Shears
Slitter Head
Slitting Lines
Straighteners
Tube Mills
Turnstiles
Uncoilers
Upenders

60" x 7.50" x 30,000# MCKAY SLITTING LINE

COIL WIDTH: 60"
COIL WEIGHT: 30,000 LBS.
CAPACITY: 0.012" - 0.187"
COIL I.D.: IN 16" - 24"
OUT 20"
COIL O.D.: 72"
LINE DIRECTION: LEFT TO RIGHT

CONSISTING OF THE FOLLOWING:

-

-ENTRY UNIT:
PASSLINE ROLL
HYDRAULIC ACTUATED PEELER TABLE
ROLLER ZIP SHEAR

-SLITTER:
1 HEAD WITH 7.50" DIA. x 63" FACE ARBORS
REMOVABLE LIFT OFF DESIGN
ENTRY DRIVEN PINCH ROLL
ENTRY EDGE GUIDES, MANUAL OPERATION
HYDRAULIC PARALLEL ARBOR ADJUSTMENT
POWERED OUTBOARD HOUSING
60 HP DC MOTOR, 850/2200 RPM, 500 V, W/BLOWER
THRU NUTALL REDUCER W/14.4:1 RATIO, 1.6 SERV. FACTOR

-LOOPING PIT COVER:
12 FT. LONG TABLE
HYDRAULIC CYLINDER RETRACTABLE

-DRAG WIPE TENSION STAND:
ENTRY SEPARATOR BAR
ENTRY PASSLINE ROLLS
DRAG PADS
APPROX. 55" PASSLINE HEIGHT
EXIT CARRY OVER TABLE TO RECOILER

-SCRAP BALLER:
APPROX. 22" W x 22" DIA. BALL CAPACITY
AUTO DUMP W/HYD. CYLINDER KICK-OUT
30 HP AC MOTOR, 1770 RPM, 208-220/440 V
WITH AIR CLUTCH, BELT DRIVE THRU REDUCER

-RECOILER:
20" DIA. x 67" FACE DRUM
MANUAL GRIPPER & EXPANSION
HYDRAULIC PUSHOFF
ATTACHED OVERARM SEPARATOR
75 HP AC MOTOR, 1745 RPM, 440 V
2 SPEED GEARBOX: 61:1 @ 143 HP, 1750 RPM
122:1 @ 76.8 HP, 1750 RPM

-2 ARM EXIT TURNSTILE: ROYALTON
NEW IN 1984
S/N: TAY-1-157
30,000# CAPACITY PER ARM
(2) - 68" LONG C-HOOK TYPE ARMS
7" W x 12" HIGH SLOT FOR C-HOOK
POWERED ROTATION
HYDRAULIC PUSHOFF
SIFCO BEARING
OVERALL LENGTH: 225" TIP TO TIP
APPROX. 43.5" FROM FLOOR TO TOP OF ARMS

LINE IS REMOVED AND IN STORAGE; TOLEDO, OH

Your InfoCart Contains 0 Machines

 

John Decator's Cell Phone:  419-215-3387
John Decator's Email Address:  john.decator@sev.org

Jim Clark's Cell Phone:  419-699-0367
Jim Clark's Email Address:  jim.clark@sev.org